The Iridium Satellite network provides global coverage from pole to pole and the use of low powered antennas ensures the Beam communication terminal provides a truly global solution. The terminal provides an intelligent RJ11/POTS interface emulating all the standard features of a PSTN (Public Telephone Service) telephone service. The user operates the connected equipment as though using a standard telephone connection, as the unit is equipped to provide configurable ring, busy and dial tones, along with off-hook detection.
The Intelligent interface
Allows for easy installation providing flexibility for maximum run cable length from the RJ11 port as well as the use of cordless and corded telephone equipment. The RST100 Beam terminal enables the integration of the terminal to a PBX system. This enables the service to be accessed directly from a standard telephone connected to the PBX. The Beam terminal supports long runs of standard copper telephone wire up to 1000 meters. Multiple extensions can be connected to the terminal.
Voice Services
The Intelligent Remote Satellite Terminal supports various options for accessing voice communications. The terminal will allow the use of an Intelligent Handset and standard phone equipment through its intelligent RJ11 connectivity. This means that standard cordless, corded or PBX systems can be integrated for voice communications on this terminal.
Intelligent Handset Interface
The Beam Intelligent Handset, RST970, is an ideal accessory for voice and SMS communications. The handset is compact, lightweight, easy to install and comes complete with hang-up cup, in-built ringer and mounting bracket.
| |
AIRTIME - Purchase Separately
<< Back to Iridium Index
|
Data Services
All Beam terminals support all of the Iridium Data services available. This then provides a flexible means by which to communicate using one or more of the following protocols;
Dial-Up Data Service
Direct Internet Data 10-12 Kbps
Short Message Service (SMS)
Short Burst Data (Selected Providers)
Local/Remote Configuration
The Intelligent processor inside the RST100 enables the terminal to be configured remotely or locally. Locally it can be simply configured with a PC using the Beam Management System (BMS) supplied.Whilst using the BMS is the most simple, it is also possible to configure most of the fields by sending commands to the terminal using SMS.
Remote Diagnostics
Using SMS with the intelligence built into the Beam RST100 terminal; it is possible to remotely configure the communication terminal. It also gives the ability to run diagnostic checks, check signal strength, terminal temperature, retrieve call logs and the ability to have automated reporting for "still alive" reporting as required.
Installation
The RST100 can be deployed for various applications. Selecting an appropriate antenna and antenna cable for the installation is very important for optimum performance. Mounting brackets, configuration CD and a 110/240 AC/DC plug pack is included with the terminal.
Power Inputs / Backup Battery
Beam terminals support 11-32V DC power input. An AC plug-pack is supplied with all terminals, which makes it easy to connect to mains or DC power. An optional Beam Battery Backup, can provide 24 hours standby time and 2 hours of talk time. The terminal is also capable of being Solar Powered.
Hands-free Interface
The optional in-vehicle hands-free accessory provides high quality, full duplex, and hands-free voice communications. Other key features of the interface include; Horn Alert Radio Integration Radio Mute. The intelligent handset can be easily removed from its cradle if a private conversation is required.
|
Turbocharge your wireless data connection with compression software by Global Marine Networks!
Send mail to
webmaster@globalmarinenet.net with questions or comments
about this web site.
Copyright © 2002-2010 Global Marine Networks
Last modified: 09/06/10
|
